R.R. BRINK 3620-300 Electromechanical Security Mogul Pin-Tumbler Deadlatch

Details

A 24VDC motorized dead-locking latch which enables the latch to retract with high side-loads applied against a locked door (loads in excess of 600lbs.). Jamb mounted.

Application

The 3620 electromechanical lock, designed for swinging doors (jamb mounted), is ideal for any door that must be able to unlock when subjected to abnirmally excessive side-loads. It is well-suited for medium security openings in correctional institutions such as cell or dayroom doors or secure openings in government buildings such as embassies. Due to the 3620's narrow depth and width, the lock may be installed within the 3" trin section (jamb or header) of a standard hollow metail frame. The installation is architectually unobtrusive yet affords superior strength and tamper resistance. The 3620 is not recommended for outdoor applications or any type of exterior door.

The 24VDC motor provides a powerful, smooth, and quiet retraction of the latchobolt which makes it ideal for sleeping areas or where noise of lock operation is a concern.

The stainless steel latchbolt dead-locks automatically when the door is in the closed position. The latch can be retracted (unlocked) manually by mogul key or electrically by low-voltage motor through a switching device (push button, key switch, card reader, remote control panel or software).

While the 3620 is provided with a lock status switch which positively indicates a deadlocked latch for control panel lights and/or alarm devices, the switch is ideally used with a door position switch (R.R. Brink Model 201030 is recommened) for positive indication of a secured opening. The 3620 can be integrated easily with an interlock circuit which makes the unlocking of one door dependent on the locked status of one or several other doors.

Electrical Specifications

• 24VDC motor: Permanent-magnetic planetary gearmotor, 2.0 amperes at full load with Polyswitch current limiter.
• Power supply must be 24VDC- plus 5%, minus 10%. For optimal operating characteristics, a regulated power supply is recommended but is not a requirement.
• Lock status switch: SPDT type, UL listed, 125/250VAC, 5 ampere.

Standard Faceplate Finish

• Satin stainless steel (U.S. 32D, B.H.M.A. Code 630), Satin brass, clear-coated (U.S. 4, B.H.M.A. Code 606)*

*Please note: List prices are for US32D Finish. Options, such as alternative finishes, may change the price of your order. Please contact Strongbar for details.

Model shown: R.R. Brink 3520-300

Want to place an order? Not sure what you need? Don’t worry... we’re here to help.

Call us! 1-800-661-5713