Yale 400 Padlocks

Details

Standard Features

Case: Solid brass, clear coated finish.

Shackle: Hardened steel, triple-plated for rust resistance, chrome finish.

Shackle Locking: Two hardened steel balls at heel and toe of shackle.

Keying: Available with 6- or 7-pin tumblers as specified. (To key into 5- pin systems, use the 424 padlock with the 1210 core. Set up the first five pins only. The regular FN117C 7-pin length control key must be used.) For alternative cylinders refer to Yale® KeyMark® and/or Yale Cylinder and Keys catalog section.

Keys: Two Change Keys supplied with each padlock, quantity of Control Keys must be specified on the order.

Optional Features

Extended Shackles: As outlined in chart.

Brass Shackles: Available in all variations of 424 and 424 padlocks. Suffix “B” to the Model No. (i.e. 424B).

Chains: 8" steel chains for steel shackles and 8" brass chains for brass shackles, clevis around shackle only. Chain Model Nos. 42S or 42A. Suffix “1/2” to the Model No. (i.e. 424 1/2). 9" chains available to special order.

Dust Guards: Prefix the padlock Model No. with “D” (i.e. D424). Dust guard is a part of the core assembly.

Specification

Dimensions and Details

Optional Shackles

Optional shackle padlocks have all other dimensions and details identical to the standard padlock.

Note: All dimensions are in inches and are to the nearest 1/16"(2mm). Dimensions are nominal.

Removable Core Features

• Core can be removed in seconds.
• No tools needed.
• Instant recoring can be accomplished, even by untrained personnel.
• Each keying system has its own control key.
• Cores are interchangeable with many type of Yale locks, including mortise, cylindrical, exit devices, and mono locks.

How To Re-Core Yale Removable Core Padlocks

1. Insert the Control Key into the keyway.
2. Turn the Control Key 15° to the right.
3. Withdraw the core assembly from the padlock case. (The entire tumbler mechanism is contained inside the core assembly.)
4. Insert the Control Key into a new core assembly and turn the key 15° to the right.
5. Insert the new core assembly into the padlock case.
6. Turn the Control Key 15° to the left and remove it. Recoring with a new key combination is complete. Security is changed in a matter of seconds.