Dorma 9300/F9300 Rim Exit Devices

Details

The 9300 and F9300 present a simple, heavy-duty, easily installed solution where high quality panic and fire-listed hardware is needed. The patented exit devices in the 9300 and F9300 Series are available in a full range of finishes and trim options. The F9300 Series devices carry an “A” label for three-hour steel fire door applications.

The heavy-duty cast chassis provides superior durability, while the smooth reduced projection touchbar assembly minimizes catch hazards. The partial length touchpad permits field installation of options such as cylinder dogging and exit alarm. A full complement of free wheeling lever trim is available in a wide range of architectural finishes.

General Information

• Partial width touchbar and rail, chassis, and latch bolt covers are fabricated from brass, bronze, aluminum, steel, or stainless steel.
• End cap for touchbar assembly furnished in complementary finish.
• Some models handed depending on outside operating trim and function.
• Most devices easily field-reversible.
• Fasteners provided for metal and wood door applications.
• Free wheeling, vandal resistant trim standard.

Certification

The DORMA 9000 Series is listed by U.L. and C.U.L. under their continuing re-inspection programs and conforms to standards U.L. 10C and U.B.C. 7-2 (1997) positive pressure testing. The DORMA 9000 Series is BHMA-certified to the requirements of ANSI A156.3 for Grade 1 exit devices. Miami-Dade County Florida acceptance No. 06-912.05.

Specifications

All exit devices shall be DORMA 9000 Series rim, mortise, surface, or concealed vertical rod devices. All devices to have heavy-duty cast chassis. All device touchbar, rail, and cover assemblies shall be constructed of heavy gauge solid wrought materials for true architectural finishes or color coated finishes where applicable.

The partial-length touch pad assembly shall permit field installation of options such as cylinder dogging and exit alarm. Non-labeled units to have hex-key dogging standard.

Fire rated versions shall be available for labeled applications. All surface vertical rod devices shall have pullman type top latch bolts and round slidebolt bottom latches. All devices to have deadlocking latch bolts with 3/4" throw where applicable.

All units shall offer a full range of free wheeling operational trim, except mortise devices. All units shall offer optional rigid and clutch-style trim, where applicable. All devices to be furnished with appropriate mounting hardware including both wood and machine screws, as well as sex nuts where required.

Warranty

• Dorma offers 10 Years - Mechanical.
• Dorma offers 2 Years - Electronic integral components and accessories.

Function - Operation - Trim Model Options

• 01 - Exit Only (no trim)

• DT - Dummy Trim

• VODT - Narrow Flat Plate Dummy Trim
• NPTDT - Wide Flat Plate Dummy Trim
• YODT - Raised Escutcheon Plate Dummy Trim

• 02 - Entrance by trim when actuating bar is locked down.

• V102 - Narrow Flat Plate Tubular Pull
• V302 - Narrow Flat Plate Rectangular Pull
• PTT02 - Wide Flat Plate Tubular Pull
• PRT02 - Wide Flat Plate Rectangular Pull
• YK02R - Raised Escutcheon Plate Knob
• YR02R - Raised Escutcheon Plate Rectangular Lever
• YT02R - Raised Escutcheon Plate Tubular Lever
• YC02R - Raised Escutcheon Plate Curved Lever 

• 03 - Entrance by trim when latch bolts are retracted by key. Key removable only when locked.

  • VO03 - Narrow Flat Plate with Cylinder Hole
  • V103 - Narrow Flat Plate Tubular Pull with Cylinder Hole
  • V303 - Narrow Flat Plate Rectangular Pull with Cylinder Hole
  • NPT03 - Wide Flat Plate with Cylinder Hole
  • PTT03 - Wide Flat Plate Tubular Pull with Cylinder Hole
  • PRT03 - Wide Flat Plate Rectangular Pull with Cylinder Hole
  • YO03 - Raised Escutcheon Plate with Cylinder Hole
  • YK03R - Raised Escutcheon Plate Knob with Cylinder Hole (rigid trim)
  • YR03R - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole (rigid trim)
  • YT03R - Raised Escutcheon Plate Tubular Lever with Cylinder Hole (rigid trim)
  • YC03R - Raised Escutcheon Plate Curved Lever with Cylinder Hole (rigid trim) 
  • K03 - Key-in-Knob
  • K03IC - Key-in-Knob Interchangeable Core
  • R03 - Key-in-Rectangular Lever
  • R03IC - Key-in-Rectangular Lever Interchangeable Core
  • C03 - Key-in-Curved Lever
  • C03IC - Key-in-Curved Lever Interchangeable Core

• 04 - Entrance by trim when latch bolts are retracted by key or set in a retracted position by key.

• VO03 - Narrow Flat Plate with Cylinder Hole
• V103 - Narrow Flat Plate Tubular Pull with Cylinder Hole
• V303 - Narrow Flat Plate Rectangular Pull with Cylinder Hole
• NPT03 - Wide Flat Plate with Cylinder Hole
• PTT03 - Wide Flat Plate Tubular Pull with Cylinder Hole
• PRT03 - Wide Flat Plate Rectangular Pull with Cylinder Hole
• YO03 - Raised Escutcheon Plate with Cylinder Hole
• YK03R - Raised Escutcheon Plate Knob with Cylinder Hole (rigid trim)
• YR03R - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole (rigid trim)
• YT03R - Raised Escutcheon Plate Tubular Lever with Cylinder Hole (rigid trim)
• YC03R - Raised Escutcheon Plate Curved Lever with Cylinder Hole (rigid trim) 
• K03 - Key-in-Knob
• K03IC - Key-in-Knob Interchangeable Core
• R03 - Key-in-Rectangular Lever
• R03IC - Key-in-Rectangular Lever Interchangeable Core
• C03 - Key-in-Curved Lever
• C03IC - Key-in-Curved Lever Interchangeable Core

• 05 - Entrance by thumbpiece. Key locks or unlocks thumbpiece.

• HTT05 - Wide Flat Plate Tubular Pull with Thumbpiece and Cylinder Hole
• HRT05 - Wide Flat Plate Rectangular Pull with Thumbpiece and Cylinder Hole

• 06 - Entrance by thumbpiece only when released by key. Key removable only when locked.

  • HTT06 - Wide Flat Plate Tubular Pull with Thumbpiece and Cylinder Hole
  • HRT06 - Wide Flat Plate Rectangular Pull with Thumbpiece and Cylinder Hole

• 08 - Entrance by knob or lever. Key locks or unlocks knob or lever.

  • YK08 - Raised Escutcheon Plate Knob with Cylinder Hole
  • YR08 - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole
  • YT08 - Raised Escutcheon Plate Tubular Lever with Cylinder Hole
  • YC08 - Raised Escutcheon Plate Curved Lever with Cylinder Hole
  • YR08C - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole
  • YT08C - Raised Escutcheon Plate Tubular Lever with Cylinder Hole
  • YC08C - Raised Escutcheon Plate Curved Lever with Cylinder Hole
  • K08 - Key-in-Knob
  • K08IC - Key-in-Knob Interchangeable Core
  • R08 - Key-in-Rectangular Lever
  • R08IC - Key-in-Rectangular Lever Interchangeable Core
  • C08 - Key-in-Curved Lever
  • C08IC - Key-in-Curved Lever interchangeable Core
  • G08 - Key-in-Curved Lever
  • G08IC - Key-in-Curved Lever interchangeable Core

• 08x08 - Entrance by lever. Outside or inside key locks or unlocks lever.
  • YR08x08* - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole. *Trim requires push-side rim cylinder (ordered separately).

• 09 - Entrance by knob or lever only when released by key. Key removable only when locked.

  • YK09 - Raised Escutcheon Plate Knob with Cylinder Hole
  • YR09 - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole
  • YT09 - Raised Escutcheon Plate Tubular Lever with Cylinder Hole
  • YC09 - Raised Escutcheon Plate Curved Lever with Cylinder Hole
  • YR09C - Raised Escutcheon Plate Rectangular Lever with Cylinder Hole
  • YT09C - Raised Escutcheon Plate Tubular Lever with Cylinder Hole
  • YC09C - Raised Escutcheon Plate Curved Lever with Cylinder Hole

• 22 - Entrance by thumbpiece and pull or pull only when actuating bar is locked down.

  • HTT22 - Wide Flat Plate Tubular Pull with Thumbpiece
  • HRT22 - Wide Flat Plate Rectangular Pull with Thumbpiece

• 23 - Entrance by knob or lever (no cylinder). Knob or lever always active.

  • YK23 - Raised Escutcheon Plate Knob
  • YR23 - Raised Escutcheon Plate Rectangular Lever
  • YT23 - Raised Escutcheon Plate Tubular Lever
  • YC23 - Raised Escutcheon Plate Curved Lever
  • K23 - Knob
  • R23 - Rectangular Lever
  • C23 - Curved Lever

*For more information on Dorma TRIM, visit Strongbar's Dorma TRIM Page

Optional Specifications

• CD: Non-labeled devices to have cylinder dogging. Mortise cylinder included.
• PB: All surface/concealed vertical rod devices to have pullman type bottom latch bolt.
• ETR: All surface/concealed vertical rod devices to have extended top rod up to 10'.
• LB: All surface/concealed vertical rod devices to be furnished less bottom rod.
• ES: Devices to have electric latch bolt retraction to provide remote access from the secure side of door. Can also be used in conjunction with low energy/automatic door operator. (ES must be powered by PS-501 power supply and use ES-105 power transfer)
• LM: Devices to have a latch monitor to report the latch bolt status.
• MS: Devices to be furnished with two switches in the touchbar to provide notification when touchbar is depressed.
• LM/MS: Devices to have latch monitor with monitor switches in touchbar.
• LM/MS BP: Devices to have latch monitor with monitor switches and a bypass to permit authorized exit.

Devices to have one of the following exit alarm options:

• BPA: Battery-powered exit alarm
• BPAR: Battery-powered exit alarm with a 4-minute reset
• DWA: Direct hard-wired exit alarm
• GK9000: Devices to use a glass lite shim kit to raise the device from the door surface to accommodate glass light molding.
• SNB: All devices for labeled wood or composite doors to be furnished with sex bolts.
• WD (9100 only): All concealed vertical rod exit devices installed in wood doors to be furnished with appropriate brackets, fasteners, and templates for wood door applications.
• ALD (9100 only): All concealed vertical rod devices installed in aluminum doors to be furnished with appropriate brackets for aluminum door applications.
• TX: All devices to use tamper-resistant security screws.
• R: All devices to be furnished with rigid trim.
• C: All devices to be furnished with clutch-style lever trim.

Strike Options

Standard Strikes:

• No. 418 - Top Strike 9100/F9100, 9100LB/F9100LB
• No. 439 - Bottom Strike 9100/F9100

Optional Strikes:

• No. 419 - Top Strike for use with wood frames
• No. 431 - Recessed Bottom Strike for optional pullman bottom latch bolt
• No. 340 - Flat Bottom Strike; Optional for use with standard bottom slidebolt

Finishes

Architectural Finishes:

• Brass: 605 (Bright) or 606 (Satin).
• Bronze: 611 (Bright), 612 (Satin), or 613 (Oxidized Satin Oil Rubbed).
• Chrome: 625 (Bright) or 626 (Satin).
• Stainless Steel: 630 (Satin).

Powder Coated Finishes:

• Aluminum: 689.
• Bronze: 691 (Dull) or 695 (Dark Duranodic).
• Gold: 696.