Alarm Lock PG21E Series Door Alarm

Details

Model PG21E Series Door Alarms

• Two selectable arming modes for security door alarms and locks –

  1. Always armed mode – when key is turned counter clockwise to the disarm position, the key cannot be removed. To remove key, turn back to arm mode, thus keeping unit armed always.
  2. Standard security door alarm arming mode – when key is inserted turning counter clockwise will disarm and key can be removed. Turning key clockwise will arm and key can be removed.

• Max-Flex Terminals, allowing for any or all of the following:

• Continuous power with the addition of an external power supply

• Multiple door monitoring permitted with built-in external reed switches

• Security Door Lock and Alarm Status Indicator – The LED will indicate RED when armed.

• Entry Delay Time Options – include 15 seconds, 1 minute 15 seconds & 3 minutes 15 seconds

• Sleek model design key-activated door alarm for use on standard size and narrow stile doors

• Unauthorized use of door causes alarm to sound and activates LED indicator

• Options include continuous alarm, minute shutdown with auto reset and exit/entry delay

• Uses standard mortise cylinder

• Tamper switch supervised

• For exterior key control, optional RIM cylinder may be used

• Finishes: Silver or Bronze

• Optional Strobe unit (shown) – PG21MSS/PG21MBS units include a highly visible amber strobe will flash when unit goes into alarm

Essential Add'on's

Model CER Rim cylinder

• Rim cyliner required for interior arming/disarming of models 11A, 80, 250, 260, 700, 710 & 715. Includes two keys (KD).

Model CEM Mortise cylinder

• Mortise cylinder used with the Pilfergard models PG10 and PG21/E to arm and disarm the alarm circuit. Includes two keys (KA or KD)

Model PP100 Battery Eliminator

• For use with all PG10, PG21/E, PG30, 250, 700, 80, 260, 710 and 715 models.
• The PP100 conserves the battery which automatically takes over as the power source to sound the alarm in the event of a power failure or intentional cut-off.
• A built-in circuit breaker with push-button reset eliminates troublesome fuse replacements.
• Includes a cam lock cylinder and 6’ of armored cable adequate to provide a door loop at the hinged-side of the door.
• Can be used with all 6V and 9V models.

Also Available: Model AC9 Power Supply

Want to place an order? Not sure what you need? Don’t worry... we’re here to help.

Call us! 1-800-661-5713