Acorn Penal-Ware 1440 Series 18” Lav/Toilet - Suicide Resistant Comby

Call for price quote.

Details

Fixture is arranged to be installed on finished wall and serviced from an accessible pipe chase. Optional Wall Sleeve or Metal Template is recommended for all installations to provide required wall openings. This unit is intended to reduce any possible risk of the fixture being used as a suicide device.

Cabinet is fabricated from 14 gage type 304 stainless steel and is seamless welded construction with exposed surfaces polished to a satin finish. The inside of the toilet bowl has a matte finish. Cabinet interior is sound deadened with fire-resistant material.

Lavatory “D” Bowl is 15” x 13” x 5-1/2” deep. Standard elbow waste outlet is 1-1/2” O.D. plain end.

Lavatory Valve is an Air-Control pneumatically operated, pushbutton valve using atmospheric air. Pushbutton requires less than 5 pounds to activate valve. Valve is metering, non-hold open type. Timing is from 5 to 60 seconds. Valve can be remotely located up to 10 feet from the operating pushbutton. Bubbler and valve pushbuttons are spherical type and do not include straight edges. Valve complies with the lead free requirements of NSF 61, Section 9-1997.

Toilet is blowout jet type with elongated bowl manufactured to ANSI 112.19.2M requirements and requires a minimum of 35 PSI flow pressure. Toilet uses a water consumption of 1.6 gallons per flush or less. Trap has minimum 3-1/2” seal and will pass a 2-1/8” ball. Toilet seat has sanitary high polish finishing. Toilet waste outlet is 2-3/8” diameter plain end for wall outlet, and Gasketed Waste for floor outlet.

Ordering Instructions

WALL THICKNESS AND TYPE (Must Specify)

Thickness ___________ Type: __ Concrete __ Block __ Steel

MODEL AND OPTIONS SELECTION:

1. TOILET ORIENTATION (Must Specify)

AL Angled Left
AR Angled Right
CT Centered Toilet

2. FIXTURE MOUNTING AND WASTE (Must Specify)

2 On-Floor, Wall Outlet
3 On-Floor, Floor Outlet

3. BUBBLER SELECTION (Must Specify)

BPH Hemispherical Penal Bubbler

4. VALVE SELECTION (Must Specify)

03 Air-Control, Single Temperature
04 Air-Control, H & C
09 Punched for Valve by Others (Specify Punching)
EVS1 Electronic Valve System - Single Temp
EVS2 Electronic Valve System - Hot & Cold
MVC1 Time-Trol - Single Temp
MVC2 Time-Trol - Hot & Cold

5. FLUSH VALVE REQUIREMENTS (Must Specify)

- FV Mechanical _____-1.6 GPF _____-3.5 GPF

_____-EVSFV ______-MVCFV

- FVH Hydraulic _____-1.6 GPF _____-3.5 GPF