RR BRINK 7050M Electromechanical Deadlocking Latch

Details

The 7050M motorized lock is an extra heavy weight electromechanical lock for use in openings subject to high traffic and/or where maximum attack resistance is a priority requirement. It is designed for jamb mounting in a grille or hollow metal frame (14 gauge minimum) with a custom fabricated and reinforced lock pocket (a.k.a. mortar box).

This unit is recommended for remote control of maximum security locations in jails or prisons (e.g. cells, dayroom entries, and sally ports) or in other building types where openings in security perim-iters must be equipped to withstand forced attack and/or constant usage.

• Maximum Security, Heavy Duty Electromechanical Deadlocking Latch for Swinging Doors.

• 24VDC or 120VAC motor power and paracentric key unlocking.

• Jamb mounted.

Standard Features

• Electrical retraction of the latchbolt is by either a 24VDC or 120VAC gearmotor.
  • Motor actuation is indicated where superior latch retraction force and quiet operation are important to the application.
• Mechanical latch is by retraction by RRBLS paracentric key/lever tumbler lock.
• With a hollow metal frame, the lock mechanism can be serviced with the lock in the frame by removing an access plate supplied by the frame manufacturer.
• Impact tested to Security Grade 1 per ASTM F1450 and F1577.

Note: When used in exterior locations, moisture proofing of the lock enclosure is essential and an internal resistance-heating strip is recommended when the lock may be subjected to extreme freezing conditions.

• Key unlocking at all times with an integral R.R. Brink lever-tumbler lock.
• Lock case and cover made of 7 gauge steel, electroplated for corrosion resistance
• Working parts are copper alloy or stainless steel.
• Powerful and quiet 120VAC or 24VDC motor.
• A case hardened, zinc-plated steel latch (highly resistant to wear and sawing) with a full 3/4"-inch throw.
  • 3/4" x 2" cross section at the locking shear point.
• Electroplated steel roller bolt deadlocks latch.
• Maintained Switch Latch Holdback (MSLH) function.
• Lock status switch (LSS) trips when the latch is in a deadlocked condition.
  • Used in a signal circuit to indicate lock status – unlocked or deadlocked – via control panel lights and/or alarm devices.
  • The LSS is also used to control an electrical interlock, which permits only one of a group of doors to be unlocked electrically at any time.

Note: For positive, tamper resistant signaling of a closed and deadlocked door, a sensitive door position (DPS) switch must be wired in combination with the LSS. RR Brink DPS Nos. 201030 or 201090 are recommended.

• Plug connectors are provided for ease in wiring and removal.
• Exposed fasteners – pinned “Torx” head.

Electrical Data

• Motor – 24VDC, 1.0 amp or 120VAC, 3 amp.
• Lock status switch – SPDT type, UL listed, 125/250 VAC, 5 amp.

Want to place an order? Not sure what you need? Don’t worry... we’re here to help.

Call us! 1-800-661-5713