RR BRINK 5020EUKL Electromechanical Automatic Deadlocking Bolt

Shop by Brand > SELECT Hinges

Call for price quote.

Details

The 5020EUKL is an electromechanical deadbolt used primarily to secure emergency exit doors which are normally locked.

High Security and Impact Resistant - 1" Throw.

120VAC solenoid actuated and manual key unlocking.

Jamb mounted.

Standard Features

Unlocking can be initiated by a remotely located switch and/or automatically (e.g. actuation of a fire alarm).
- When unlocked electrically, the 5020 EUKL must be relocked manually by key at the door (i.e. electric unlock, key lock).
- Feature precludes inadvertant or intentional locking of a means of egress during an emergency situation.
Electric unlocking is accomplished by a 120VAC solenoid actuator.
- Deadbolt retraction is quick and accompanied by a noticeable clap sound.
Mechanical deadbolt retraction by pin tumbler key cylinder – commercial or “Prison Mogul” types.
Normally jamb mounted in a steel door frame (14 gauge minimum) in a specially fabricated and reinforced lock pocket (or mortar box).
Impact tested to Security Grade 1 per ASTM F1450 and F1577.

Note: When used in exterior locations, moisture proofing of the lock enclosure is essential and an internal resistance heating strip is recommended when the lock may be subjected to extreme freezing conditions.

Lock case and made cover of 10 gauge steel, electroplated for corrosion resistance
Bolt made of saw-resistant hardened steel with a full 1” throw and 3/4” x 1-1/2” cross section.
Cast stainless steel strike plate.
Working parts are high strength bronze or stainless steel.
Lock status switch (LSS) trips when the bolt is in a deadlocked condition.
- Used in a signal circuit to indicate lock status – unlocked or deadlocked – via control panel lights and/or alarm devices.

Note: For positive, tamper resistant signaling of a closed and deadlocked door, a sensitive door position (DPS) switch must be wired in combination with the LSS. RR Brink DPS Nos. 201030 or 201090 are recommended.

Fitted for mechanical operation via either RRBLS proprietary “Mogul” or user’s commercial key cylinder. (Factory supplied commercial key cylin-der optional.)
- For stop side only or both side frame keying, the frame manufacturer must provide stop (push) side cylinder access or optional “key cylinder extension” (KCE).
- Keycylinder(s) must be factory assembled in lock.

Available Cylinder Finishes:

Satin Brass (ANSI 606, US4)
Chrome (ANSI 626, US26D)

Additional Features:

Plug connectors are provided for ease in wiring and removal.
Exposed fasteners – pinned “Torx” head

Electrical Data

Solenoid – 120VAC – 10 ampere in-rush, 0.75 ampere seated
Lock Status Switch – 125/250VAC, 5 amp, SPDT (Form C) 5020