RR BRINK 1050 Electromechanical Lock

Details

The Model 1050 is the counterpart to the RRBLS Model 1060 featuring electric (solenoid) rather than mechanical (key) knob control. This affords remote control of individual door locking and unlocking. One knob can be electrically locked and unlocked with the opposite either always active or inactive. Also, both knobs can be electrically locked and unlocked simultaneously.

An inactive knob spins freely to prevent forcing. The optional Lever Eskort can be substituted for the standard knobs. An internal limit switch is available to signal at the remote control panel the dead-locked or unlocked status of the latch.

The 1050 is available in two electric lock-ing modes — Fail Secure (FSE) and Fail Safe (FS).

With the FSE mode, the controlled knob(s) is locked without power and unlocked with power and, thus, would revert to the locked condition in the event of a power failure. The FS mode is the opposite of FSE, i.e. power is required for locking. The latch can always be retracted by key.

Since the 1050 is door mounted, a through wire hinge or other flexible power connection is required between the door frame and the door.

Standard Features

• Lock case, armor front, springs, and working parts are made of stainless steel.

• Solid forged-brass trim cannot be removed when the door is in the closed and locked position – all mounting screws are concealed. A locked or inactive knob spins freely to prevent forced breakage of the lock works.

• Stainless steel latch with a full 3⁄4” throw.

• Stainless steel strike plate.

• Working parts made of copper alloy or stainless steel.

• Solenoid – constant duty tubular type – 24VDC, 0.33 amp.

• Lock Status Switch – Integral limit switch to monitor lock status, (i.e. deadlocked or unlocked) by lights, alarms, and/or other door condition indicators. Commonly connected in combination with a door position switch to give positive indication that a door is in both the closed and locked position.

• Fitted for mechanical operation via either RRBLS proprietary “Mogul” or user’s commercial key cylinder. (Factory supplied commercial key cylinder optional.)

• Exposed fasteners – pinned “Torx” head.

Exposed Faceplate Metals/Finishes:

• Satin Stainless Steel – (ANSI 630, US32D)

• Satin Brass – (ANSI 606, US4)

Standard Trim:

• Satin Brass, (ANSI 606, US4)

• Satin Chrome on Brass (ANSI 626, US26D)

Optional Features

• Factory Key Cylinder (specify FKC and all keying information) – High security mortise type with finish matching lock face plate.

• Mogul Cylinder (specify MOG and all keying information) – R.R. Brink six pin mogul cylinder.

• Rectifier (specify RC, Model 1050 only – Attached to 24VDC solenoid lead wires to permit use of 24VAC from transformer.

• Safety Knob (specify SK) – Solid brass, conical shaped knob serves to limit handgrip to prevent holding a door closed. Specifically designed for jail/prison sleeping room doors.

• Lever Eskort (specify LE) – Enables the designer/specifier to satisfy Americans with Disabilities Act (ADA) accessibility requirements and avoid intentional, forced lever breakage.

• Face Plate – Bright Brass, clear-coated (ANSI 605, US3), Bright Stainless Steel (ANSI 629, US32)

• Knob Set – Bright Brass, clear-coated (ANSI 605, US3), Bright Chromium Plated (ANSI 625, US26)

Want to place an order? Not sure what you need? Don’t worry... we’re here to help.

Call us! 1-800-661-5713