Corbin Russwin - Princeton (PZD) Lever Redesign

January 18, 2010

Corbin Russwin announces a redesign of the Princeton lever for use with ANSI/ BHMA Grade 1 CL3300 cylindrical locks. The redesigned Princeton lever is made from the same solid die cast zinc as the current Princeton lever, and can retrofit to existing CL3300 cylindrical lock installations.

A distinct advantage of the redesigned Princeton lever is that it looks the same as the Corbin Russwin ANSI/BHMA Grade 1 CL3500 and Grade 2 CL3800 Princeton lever. Buildings can have a consistent design aesthetic from a main entrance to an office to a stairwell without compromising the security needs of each door opening.

Benefits of the Redesigned Princeton Lever:

• A more comfortable grip than the current lever
• Same look as the CL3500 and CL3800 Princeton Lever design
• Retrofits to existing CL3300 cylindrical lock installations

Hager - Adding ¾” Latchbolt to Cylindrical Lock line

December 30, 2009

Hager has recently added a 3/4” latch for use with cylindrical locksets.

• 3/4” Dead Latch (3450, 3453, 3470, 3480, 3495)
• 2-3/4” (70 mm) Backset
• 2-1/4” x 1-1/8” (57 mm x 29 mm) Square corner faceplate

In general, single point locks or latches with 3/4” minimum latch throw are intended for the active door of doors mounted in pairs and the inactive door provided with top and bottom flush or surface bolts.

Some manufacturers can provide fire doors mounted in pairs with a minimum latch throw less than 3/4”. The door classification specifies the minimum latch throw required for the individual door.

Pemko - New Molex Connectors Available

December 23, 2009

Pemko Continuous Hinge SER Modules are now supplied with Micro Fit 3.0 Molex connectors. This means even more added security for use in hotels, hospitals, museums, banks, private businesses, schools, and everywhere else where protection is important. But the enefits are not just limited to your clients. Installations are simpler, quicker, and smoother.

The Design: The QC12 features Thick wires with a Standardized Concealed plug-in connector.

The Benefits:

• The concealed plug connectors eliminate the need for separate or exposed wiring.
• Standard connectors and polarized mating part make installation quick, easy, and smooth by simply snapping ends together eliminating the stress and headaches from complicated wire configurations and potential errors.
• Compatible with other Assa Abloy brands: ADAMS RITE, CECO, CURRIES, CORBIN RUSSWIN, FLEMING, FOLGER ADAM, MCKINNEY, RIXSON, SARGENT, and YALE COMMERCIAL

The Technical:

• QC12 hinge contains an 8 position and 4 position microfit 3.0 female housing.
• Wire is 22AWG
• Each conductor is capable of carrying 7 amps at 24 volts with a 16 amp in rush current for 820 milliseconds.

Adams Rite - 4900 Series Deadlatch Offering 31/32" Backset

December 18, 2009

In their effort to round out the product line for the 4900 series deadlatch, Adams Rite has added a 31/32" backset to the product offering.

This addition allows for Grade 1 deadlatch to be ordered in all the popular backset sizes.  The 4900 will also be included with the Adams Rite 8400 series exit devices when a 31/32" backset is ordered.

4900 Series Features:

• Fully reversible 5/8” solid brass latchbolt
• Comes complete with flat & radiused faceplates
• Adjustable bevel
• One piece cast holdback feature
• Tube spacer with through-the-front hex adjustment
• Stainless steel auxiliary latchpin prevents loiding or case knife entry

Yale - inTouch Stand Alone Touchscreen Cylindrical Locks

December 9, 2009

Yale inTouch Stand-alone Touchscreen Access Locks combine robust cylindrical locksets with a contemporary electronic aesthetic.

Users benefit from an interactive touchscreen that makes day-to-day access effortless and offers voice-guided programming for  simple updates to user information in the event of staffing changes or security breaches.

Rixson – New Light Duty Pivot Series

December 9, 2009

Rixson announces two newly designed pivots: one offset, one center hung, to compliment its comprehensive line of door hanging solutions.

The model 173 is for offset applications and 176 is for center hung doors, employing a concrete anchor for a sleek installation - no floor plates to contend with and no visible attachment.

Designed for light weight (150#), narrow (3'0" and under) and low frequency doors, they are perfect for commercial tenant spaces and high end residential projects.

• All pivot buy programs apply
• Standard architectural finishes
• Normal pivot lead times
• Accepting orders now

Corbin Russwin - The Piet Lever Collection

Corbin Russwin introduces a new lever family to the decorative Museo Collection.  The new Piet Lever Collection has six aesthetically pleasing lever styles with sleek, clean lines. 

Think of the Piet Collection for commercial projects such as office campuses, museums, and hotels; and large residential projects such as condominium complexes. 

Designed for use with a full complement of Corbin Russwin commercial door hardware, the Piet Collection levers coordinate seamlessly with exit devices, tubular locks, mortise locks and access control hardware.

Dorma - DORMOTION Cushioned Sliding System

December 1, 2009

The new DORMOTION system from DORMA Glass provides assisted closing and comfortable cushioning of interior glass doors in commercial and residential settings.

When integrated into DORMA’s AGILE 150 sliding door system, DORMOTION hardware gently decelerates, assists and smoothly draws the sliding panel to its end position as it travels on the roller assembly. The action resembles the spring-aided, self-drawing action of kitchen drawers.

The system also provides leading-edge cushioning of door movement at the limits of travel, preventing harsh end stops that could damage the door or hardware. An end stop function holds the door panel in place after opening or closure, eliminating uncontrolled fallback and incomplete closure.

SARGENT - Gramercy Series Designer Levers

November 25, 2009

SARGENT announces the addition of the Gramercy Series to their Studio Collection levers.

The Gramercy Series consists of 6 new levers: RAL, RAM, RAS, RAW, RCM, and REM. Many of these levers have textural inserts, including leather, wood, metal and Santoprene.  They can be used with exit devices, tubular and mortise locks, access control, electromechanical products and master key systems, consistent with other Studio Collection Series.

Hager - 4500 Series less Bottom Rod

November 23, 2009

• Lifetime warranty
• Grade 1
• Thru-bolts supplied standard

Hager introduces the 4500 Series Less Bottom Rod (LBR) exit device for use in schools, hospitals, hospitality, and warehouse facilities.

The 4500 Series LBR is suitable for both panic and fire rated openings. It is a perfect solution to ensure an obstruction-free, aesthetically pleasing exit device for your door openings.

Corbin Russwin - Anti-Harm Knob Trim for ML2000 Mortise Lock

November 11, 2009

Corbin Russwin introduces the anti-harm knob (HSS) trim for use with the ML2000 mortise lock.

The anti-harm knob is designed for safety and security by eliminating catch points with a tapered knob recessed into the rose, a tapered thumbturn (for mortise lock thumbturn functions) with Torx pin security screws, tapered cylinder collars and concealed mounting screws. 

Available as sectional trim, the anti-harm knob features recessed finger holes for a better grip and the reliability of the ML2000 ANSI/BHMA Grade 1 mortise lock.

DORMA - C500 Series, Grade 2 Locksets

November 3, 2009

Combining outstanding performance, affordability and more, DORMA’s new C500 Series Locksets feature a high-performance cylindrical chassis for applications requiring ANSI A156.2 Series 4000 Grade 2 products.

The key-in-lever locksets offer two ADA-compliant lever designs (radiused and angular), four standard finishes and two optional finishes to meet a wide range of aesthetic demands and applications, including hotels, apartments, churches, municipal buildings, retail complexes, offices and warehouses. They are available in 10 different lock functions to accommodate an assortment of privacy, security and access needs.

Constructed of steel, stainless steel, and precision castings for superior strength, durability, and corrosion resistance, C500 Series Locksets include special auxiliary support springs to insure smooth operation and long life. The locksets have an optional through-bolted chassis for additional strength and increased resistance to vibration.

Yale - SC400/SC4400 Series Security Door Closers

October 28, 2009

Yale’s High Security Closers are designed for use in prisons, government buildings, schools, financial institutions, or any installation where vandalism, abuse, escape, personal injury, or damage to doors, walls, and hardware are major concerns.

The Security Closer Line uses Yale’s 400 and 4400 series institutional door closers with a variety of regular rigid and parallel rigid arms and track options. Hold open arms are also available. Fixed link arm assemblies, permanent joints, orbital riveted elbows, arm shoe and soffit plate joints and Torx® screws with tread lock prevent disassembly. Torx screws with security pin are provided standard for tamper resistance.

Features:

• Security arms – joints feature permanent, orbital riveted elbow and arm shoe/soffit plate joints which prevent disassembly
• Adjustable backcheck cushioning and positioning
• Torx drive machine screws with security pin
• Heavy-duty arms: Regular Rigid, Parallel Rigid, Holder/Stop and Holder/Stop Spring
• 10-year limited warranty

• Slide track – push or pull mounting
• Delayed action
• Enhanced backcheck

HES - Vista V3

October 1, 2009

Real value and versatility from one of Strongbar's leading electric strike brands.

The Vista V3 series offers real value, innovation, and flexibility in one compact product.  With 8 different faceplates options, plus 2 spacers to adjust for cutout depth, Vista V3 can replace multiple competing electric strikes with NO modification to the frame.  Offering up to 1/4" of horizontal adjustability in small increments, Vista V3 is ideal for cylindrical locksets with 1/2" to 5/8" latchbolts, in medium duty applications.

HES - Fire-Rated, Concealed 8300 Series Electric Strikes

September 30, 2009

HES announces the release of the 8300 Series, the first fire-rated, concealed electric strike that requires no cutting of the frame. Best of all, this new solution is a fire-rated electric strike that falls within the guidelines for retrofit into fire-rated frames.

The 8300 helps system integrators, installers and facility managers get the ‘Power of 3; by saving money, saving time, and saving lives.

GMS - Product Enhancements

September 28, 2009

Interchangeable Cores

GMS announces that the following finishes will be offered for all Interchangeable Cores effective immediately: US3, US4, US10B, US26 and US26D

**Please note US3 and US10B cores will have a US4 plug and US26 cores will have a US26D plug.

This enhancement to our IC core product category will allow GMS to offer a better, more complete array of finishes.

Keys for Zero-Bitted (OB) Cylinders

Keys for zero-bitted (OB) cylinders in all keyways will now come UNCUT along the blade instead of the standard #1 cuts.

All OB cylinders will still be pinned up with #1 bottom pins. However, the keys in the box must be cut before they can operate the cylinder.

SARGENT Adds iCLASS Compatability to Harmony Series

September 15, 2009

The Harmony Series of online integrated Wiegand access control products now supports HID 13.56 MHz iCLASS, as well as 125 kHz prox credentials.

iCLASS technology offers enhanced security through encryption and mutual authentication.  All radio frequency data transmission between the card and reader is encrypted using a secure algorithm.  By using industry standard encryption techniques, iCLASS reduces the risk of compromised data or duplicated cards.

Schlage: Introducing the AD-Series

September 7, 2009

Security professionals can now choose the specific electronic lock they need with full confidence that it can be later upgraded without ever taking it off the door.

The new Schlage AD-Series electronic locks provide options to truly customize the access control solution, quickly migrate to future needs and provide seamless integration, now and later, at a lower cost of ownership.

Components that have been traditionally located around the door are now integrated into the lock itself to yield a smarter solution and more value for the investment. From large buildings with complex demands to a small office with only a few openings, AD-Series locks can be configured to create a custom fit right at the lock. AD-Series electronic locks are compatible with all popular exit devices, provide a host of power and cylinder options, offer field configurable settings and include a wide variety of finishes and levers.

The new Schlage AD-Series electronic locks begin shipping in December. More information on them is available at www.schlage.com/ad-series.

Southern Folger: TestPro™ portable tester for preventive maintenance checks

August 10, 2009

The Southern Folger TestPro™ unit is a sturdy, portable tester for preventive maintenance checks. With easy-to-read indicator lights, the ergonomically designed unit will operate all current models of Southern Steel and Folger Adam electric and pneumatic locks and locking devices. The Consolidated set of switches control all lock functions.

 Source: 'The Southern Folger Insider'

Schlage, Von Duprin, LCN add 'Aged Bronze' Finish

August 5, 2009

Ingersoll Rand Security Technologies announced the launch of the company's new 643e Aged Bronze finish for locks, exit devices, closers, accessories and electronics.

Aged Bronze offers a classic distinctive look that lasts long into the future without wear or weathering, perfect for commercial applications. 643e Aged Bronze is available on Schlage, Von Duprin, Ives, Glynn-Johnson and LCN brands of products. In addition to providing a naturally aged, historic look with a soft bronze highlight and attractive rich coloring, the new finish will maintain its original look over time.

Products with the new 643e Aged Bronze finish are available for order from Strongbar.

DORMA: Antimicrobial coating for locks, exit devices

July 25, 2009

With a new coating option featuring antimicrobial protection, several DORMA Architectural Hardware products can now meet the strict specifications for projects in which ultra-clean tactile surfaces are desired or necessary.

In environments such as healthcare facilities, educational institutions, food processing and manufacturing areas, public venues, office buildings, hotels, and restaurants, the new antimicrobial-protected coating can add an increased level of cleanliness due to its microbe growth-inhibiting properties.

DORMA's CL800 Cylindrical, ML9000 Mortise and D800 Deadbolt lockset series offer the coating option on levers, roses, escutcheons, thumbturns, trim rings and cylinder face plates. For the DORMA family of exit devices, the coating is added to the touchbar, touchbar rail, chassis cover, end cap, surface vertical rods and latch covers, as well as to the following trim components: escutcheon, plate, rose, lever, knob, pull and thumbturn.

Source: www.canadiansecuritymag.com

For more information, visit DORMA Architectural Hardware online

SARGENT: Aluminum Door Option for the 8400 and 8600 Series Exit Devices

June 10, 2009

SARGENT has added a new option (AD-) specifically for aluminum door applications.

The AD-8400 and AD-8600 exit devices include a new strike (#640) to ease field installation. There is no up-charge for the AD- option for both 8400 and 8600 exit devices.

Corbin Russwin: Small Format Interchangeable Core [SFIC] Housings

May 12, 2009

The new SFIC housing is designed to work with both Corbin Russwin mortise and exit trim hardware and will accept all SFIC cores. The housing is made to Corbin Russwin specifications using Corbin Russwin mortise cams and exit trim cylinder tail pieces ensuring all functions work flawlessly.

Features and Benefits:

• SFIC housings are made from solid brass and incorporate a cylinder scalp to match any architectural finish.
• Small Format Interchangeable Core [SFIC] lock systems are ideal for rekeying locks quickly and easily versus standard fixed cores.
• Corbin Russwin offers SFIC prepped knobs and levers for cylindrical locks and sfic housings for all Mortise locks and Exit devices.
• SFIC cylinder housings are manufactured with the same precision as Corbin Russwin LFIC cylinders.
• All Corbin Russwin hardware is now compatible with all SFIC cores.

SARGENT: XC Series Cylinders Available with Removable Core

May 6, 2009

SARGENT Announces Availability of the XC Key System in 6300 Removable Core Format.

The patented XC Key System is now available in removable Large Format Interchangeable Core (LFIC) format. The XC system provides a cost-effective method to increase security and key control by limiting unauthorized duplication.

Yale: YMD100 Series Deadbolts

April 16, 2009

Yale introduces ANSI/BHMA A156.5 Grade 1 certified deadbolts in the following two functions: Cylinder x Thumbturn Cylinder x Cylinder

Yale YM Series deadbolts are the ideal choice for a wide variety of commercial applications where consistent quality, ease of use and installation are required at an economical price. The YMD100 Series is certified to ANSI/BHMA Grade 1 standards and the YMD200 Series is certified to ANSI/BHMA Grade 2 standards. Both series are UL fire-listed for all functions ensuring reliability and peace of mind.

Yale: 7380F Multi-Point Locking Device

April 14, 2009

7380F Series FEMA Multi-Point Auto Deadlocking System is a windstorm solution that was engineered to save lives.

Yale 7380F Series is a FEMA multi-point auto deadlocking system developed to help protect lives while securing community shelter and safe room entry. Extra heavy-duty steel components firmly fasten the door to the frame - at top, bottom and centre latch points - reinforcing the opening to endure severe wind speeds and flying debris.

HES/Folger Adam: 310-4S

March 23, 2009

This industrial grade electric strike is used with rim exit devices.

This heavy duty electric strike offers amazing versatility. Both the 310-4 and 310-4S come with a standard 3/4" thick faceplate, suitable for metal frames. For aluminum frames, an integrated shim quickly unscrews to create a 1/2" faceplate.

Falcon: New 24, 25 Series Exit Devices

March 17, 2009

Ingersoll Rand Security Technologies announced that its new durable and stylish narrow stile Falcon 24 Series and wide stile 25 Series exit devices provide a perfect fit for and handle some of the toughest door traffic challenges possible. Falcon Door Hardware customers will want to consider the new Falcon exit devices at offices, banks, assisted living facilities, restaurants, schools, churches and other commercial venues and in both new construction and remodelling projects.

For more information, visit Strongbar's Falcon 24 and 25 Series product page 

Adams Rite: New 3090 eForce Battery-Operated Key Pad Control

March 12, 2009

The eForce-150 is a new battery-operated key pad control for Adams Rite deadbolts, deadlatches and exit devices that are compatible with narrow, medium and wide stile aluminum, steel and wood door applications.

The device can accommodate up to 150 users, (including master, supervisor and emergency users) plus two one-time codes. The eForce-150 can operate in three modes: Standard, Passage and Lockout. All programming is accomplished via the keypad. Device operation is confirmed by both visual LED light indicator and an audible sound generated by a piezo horn.

For more information, visit Strongbar's 3090 eForce product page

Trilogy Networx: New Wireless Networking Locks

March 9, 2009

Alarm Lock has added powerful wireless networking locks to its comprehensive line of door technologies. Trilogy Networx lock(s) are programmed directly from a dedicated PC and free facility managers from having to go to each door to program locks. This translates to lower maintenance costs and the elimination of expense wiring runs.

For more information, visit Strongbar’s Trilogy Networx product page

Schlage: New UL294-Listed Power Supplies

March 2, 2009

Ingersoll Rand Security Technologies announced new UL294-listed power supplies that support access control applications. Offering unparalleled reliability and ease of installation, the new 500-ULAC 1-Amp and 3-Amp power supplies, supplied standard with AC input, output and battery monitoring circuits, will power devices locally or connect to an access control panel. The two new Schlage 500-ULAC power supplies are an excellent choice for both new construction or aftermarket applications.

Unique features include an on-board rack with dual control module capability for interlocking applications at higher security doors and a time control module for delayed egress.

For more information on these and other power supplies, visit Strongbar’s Power Supply products section

Trilogy: Narrow Stile Products now available for use with Exit Devices

January 28, 2009

Alarm Lock debuts its Narrow Stile Exit Trims to commercial businesses including universities, hospitals, laboratories, airports, office buildings and retailers. These locks are easy to install and simple to use.

Narrow Stile Exit Devices are vandal-resistant to protect storefronts and managed properties around the clock. Easily installed on most aluminum and glass doors, Narrow Stile Exit Trims operate with Jackson, Dor-O-Matic, Von Duprin, Dorma, Arrow, DCI & Corbin panic devices and can withstand temperatures of -31˚ to 151˚F (-35˚ to 66˚C).

For more information, visit Strongbar’s Trilogy product section

HES: New HT5000 Series— Smartest, Low Profile Hybrid Electric Strike

January 12, 2009

HES now offers the HT5000 Hybrid Electric Strike, a compact, high performance strike with embedded Hi-O™ technology. Perfect for openings where there is limited space behind the jamb, the HT5000 pairs with other Hi-O enabled products to deliver a new standard of network intelligence and physical security around the door.

With the intelligence built into the HT5000 series, installation and configuration are easy. Hi-O incorporates built-in CAN (Controller Area Network) technology to self-monitor and communicate its health.

Building owners receive precise information via encrypted communication, so maintenance becomes predictive, rather than reactive, and end-users know in real-time if there has been a security breach.

For more information, visit Strongbar’s HT5000 Series product page

HES/Folger Adam: New 310-4(S) Electric Strike for Squarebolt, Rim Exit Devices

January 8, 2009

HES launched the Folger Adam 310-4(S), the first-ever industrial grade electric strike designed for use with squarebolt style latchbolts.

This extra heavy duty, electric strike offers amazing versatility and is compatible with industry leading rim exit devices. Based on the popular 310-4 series, the Folger Adam 310-4(S) features a ¾” thick faceplate, suitable for metal frames—with an integrated shim that quickly unscrews to create a ½” thick faceplate for aluminum frames, as well as in-frame horizontal adjustability.

For more information, visit Strongbar’s 310-4(S) product page

Rixson: New 1350 and 1351 Gate Closers

December 1, 2008

Rixson announces an addition to their gate closer offering...the new models 1350 and 1351. These closers are intended for use on exterior gates where closing devices are required. The 1350 and 1351 are the perfect solutions for many gate closing applications! As you can see, in the attached catalogue insert, the package includes a gate post mounting plate, closer, slide track and arm and gate mounting braces.

For more information, Visit Strongbar’s Rixson 1350 and 1351 product pages